Bulkheads

We provide a wide number of different bulkheads for different connector types and housings. We have Nikonos-compatible and S6-compatible bulkheads for Olympus PT housings and we provide single bulkheads for universal use. Every bulkhead is shipped with a waterproof blanking cap.


Overview:

Connector type

Nikonos TTL compatible (Springloaded pins)

S6 compatible

Universal bulkheads

Type: N5

With thread M14x1, O-Ring sealed. Can be installed in a 14mm hole (max. wall thickness 6mm) or in a M14x1 thread.

5-wired ribbon cable, approx. 20cm

Type: S6

With thread M14x1, O-Ring sealed. Can be installed in a 14mm hole (max. wall thickness 6mm) or in a M14x1 thread.

6-wired ribbon cable, approx. 20cm

For housings: PT-020, PT-022, PT-023 and PT-027

Type: OLY-PT-N1

With thread M10x0.75, O-Ring sealed. Replaces original bulkhead.

4-wired ribbon cable, approx. 10cm with connector to OLY-TTL-C converter.

OLY-TTL-C converter included!

 

Type: OLY-PT-S6-1

With thread M10x0.75, O-Ring sealed. Replaces original bulkhead.

6-wired ribbon cable, approx. 10cm with connector to OLY-TTL-C converter.

OLY-TTL-C converter included!

 

For housings: PT-030 and PTE-03

Type: OLY-PT-N2

With thread M12x1, O-Ring sealed. Replaces original bulkhead.

5-wired ribbon cable, approx. 10cm with connector to OLY-TTL-C converter.

OLY-TTL-C converter included!

Type: OLY-PT-S6-2

With thread M12x1, O-Ring sealed. Replaces original bulkhead.

6-wired ribbon cable, approx. 10cm with connector to OLY-TTL-C converter.

OLY-TTL-C converter included!

For housings: PTE-01 and PTE-02

Type: OLY-PT-E1

With thread M10x0.75, O-Ring sealed. Replaces original bulkhead.

5-wired ribbon cable, approx. 10cm with connector to OLY-TTL-C converter.

OLY-TTL-C converter included!

Type: OLY-PT-S6E1

With thread M10x0.75, O-Ring sealed. Replaces original bulkhead.

6-wired ribbon cable, approx. 10cm with connector to OLY-TTL-C converter.

OLY-TTL-C converter included!

For Ikelite-housings

Type: I-N5

With thread UNC 1/2", O-Ring sealed. Replaces original bulkhead.

5-wired ribbon cable, approx. 20cm

Type: I-S6

With thread UNC 1/2", O-Ring sealed. Replaces original bulkhead.

6-wired ribbon cable, approx. 20cm

 

Olympus replacement bulkheads:

Converter is included with any PT-bulkhead

  • very compact, microprozessor controlled converter
  • no battery needed
  • TTL exposures, all modes are supported: spot, multi or even "ESP"
  • the camera will choose between 67 different power levels (with a YS60) instead of the 5-10 settings possible with a manual strobe
  • no internal strobe, therefore also no need to wait for its time-consuming recharge
  • no waste of energy due to the (often covered) internal strobe
  • no problems whatsoever with "optical feedback"
  • the "Super Macro" mode can be used with an external strobe
  • the external strobe can even be used in"HI" sequential mode (1 picture/sec)

To view a list of all compatible strobes, follow the link and select your camera in our strobe database. All strobes in green are officially supported.

Shipping contents: Replacement bulkhead, blanking cap, OLY-TTL-C converter, user- and installation manual.

The VAT will be substracted for orders from outside the boundaries of the EU.


Please direct your requests via e-mail to: info@heinrichsweikamp.com.
Prices and our conditions of shipping are listed at Contact/Orders